Interface-mediated synthesis of monodisperse ZnS nanoparticles with sulfate-reducing bacterium culture

We have created a new method of ZnS nanospheres synthesis. By interface-mediated precipitation method (IMPM), monodisperse ZnS nanoparticles was synthesized on the particle surface of sulfate-reducing bacterium nutritious agar culture. Sulfate-reducing bacterium (SRB) was used as a sulfide producer because of its dissimilatory sulfate reduction capability, meanwhile produced a variety of amino acids acting as templates for nanomaterials synthesis. Then zinc acetate was dispersed into nutritious agar plate. Subsequently agar plate was broken into particles bearing much external surface, which successfully mediated the synthesis of monodisperse ZnS nanoparticles. The morphology of monodisperse ZnS nanospheres and SRB were examined by scanning electron microscopy (SEM), and the microstructure was investigated by X-ray diffraction (XRD). The thermostability of ZnS nanoparticles was determined by thermo gravimetric-differential thermo gravimetric (TG-DTG). The maximum absorption wavelengh was analysed with an ultravioletvisible spectrophotometer within a range of 199-700 nm. As a result, monodisperse ZnS nanoparticles were successfully synthesized, with an average diameter of 80 nm. Maximum absorption wavelengh was 228 nm, and heat decomposed temperature of monodisperse ZnS nanoparticles was 596℃.     

Interface-mediated synthesis of monodisperse ZnS nanoparticles with sulfate-reducing bacterium culture

We have created a new method of ZnS nanospheres synthesis. By interface-mediated precipitation method (IMPM), monodisperse ZnS nanoparticles was synthesized on the particle surface of sulfate-reducing bacterium nutritious agar culture. Sulfate-reducing bacterium (SRB) was used as a sulfide producer because of its dissimilatory sulfate reduction capability, meanwhile produced a variety of amino acids acting as templates for nanomaterials synthesis. Then zinc acetate was dispersed into nutritious agar plate. Subsequently agar plate was broken into particles bearing much external surface, which successfully mediated the synthesis of monodisperse ZnS nanoparticles. The morphology of monodisperse ZnS nanospheres and SRB were examined by scanning electron microscopy (SEM), and the microstructure was investigated by X-ray diffraction (XRD). The thermostability of ZnS nanoparticles was determined by thermo gravimetric-differential thermo gravimetric (TG-DTG). The maximum absorption wavelengh was analysed with an ultraviolet-visible spectrophotometer within a range of 199–700 nm. As a result, monodisperse ZnS nanoparticles were successfully synthesized, with an average diameter of 80 nm. Maximum absorption wavelengh was 228 nm, and heat decomposed temperature of monodisperse ZnS nanoparticles was 596°C.     

不同pH下纳米铁镍颗粒对生物降解苯酚的影响

研究不同pH(8.0、6.0和3.0)下金属纳米颗粒(Fe和Fe/Ni)对纺锤芽孢杆菌(BFN)降解苯酚的影响.实验结果发现pH在8.0和6.0时投加2种金属纳米颗粒(Fe和Fe/Ni)对BFN降解苯酚有促进作用,其原因主要是纳米颗粒在水中持续腐蚀产生H2,为BFN降解苯酚提供电子,促进BFN的生长.但在pH=3.0时,只有BFN-纳米Fe耦合体系才使苯酚得到部分降解,主要是因为纳米Fe颗粒与水反应产生OH-,使pH值有所升高,更适宜BFN的生长,同时提供电子供体H2促进BFN对苯酚的利用.扫描电镜(SEM)和能谱分析(EDS)数据证实金属纳米颗粒(Fe和Fe/Ni)在反应后附着在微生物表面,但微生物的表面形态并未发生显著改变.因此,纳米金属颗粒虽然通过附着影响微生物的活性,但其在腐蚀过程中产生的H2将作为电子供体而被BFN所利用,综合作用的结果是有利于BFN的生长进而提高苯酚的降解速率.     

华北平原玉米-小麦轮作农田N2O交换通量的研究

以华北地区冬小麦-夏玉米轮作农田为研究对象,运用静态箱法对正常施肥及正常施肥结合秸秆还田农田N2O交换通量进行了连续1 a对比研究.正常施肥及正常施肥结合秸秆还田样地N2O全年的累积排放量分别为7.61 kg.hm-2和12.6kg.hm-2,其中秸秆还田引起N2O排放明显增加主要发生在玉米生长季节.两种处理样地在玉米季N2O的排放量占全年累积排放的57%～86%,表明华北玉米-小麦轮作体系中N2O排放主要集中在玉米季.各次施肥后10 d内N2O的累积排放量约占全年总排放量的71%～88%,显然现有化肥极大促进了华北农田N2O排放.     

Fe-MnOx-CeO2/ZrO2低温催化还原NO性能研究

以纳米ZrO2为载体,用浸渍法制备出Fe-MnOx-CeO2/ZrO2催化剂,考察了活性组分配比和助剂负载量对催化剂低温NH3选择性催化还原NO活性的影响,并对催化剂进行了XRD、SEM、EDS和BET表征;探讨了温度、H2O和SO2对Fe-MnOx-CeO2/ZrO2催化剂低温下NH3选择性催化还原NO的影响,结果表明,无SO2和H2O条件下,8%Fe-10%MnOx-CeO2/ZrO2催化剂具有良好的催化活性和稳定性.120℃时,催化剂的脱硝效率为85.23%,当温度升至180℃时,脱硝效率可达到92.0%.SO2和H2O共存条件下,催化剂易失活,采用傅立叶变换红外光谱对各反应阶段的催化剂进行了表征,对其失活机制进行深入研究,结果表明,催化剂失活的主要原因是催化剂表面硫酸铵盐的沉积和催化剂本身活性成分的硫酸盐化.     

双季稻田CH4和N2 O排放特征及品种筛选研究

通过大田小区实验,采用静止箱-气相色谱法对早晚两季水稻品种CH4与N2O排放通量进行了观测.结果表明,早稻CH4排放季节变化呈单峰模式,N2O排放呈双峰模式;晚稻CH4与N2O排放季节变化均呈单峰模式.CH4、N2O季节平均排放通量品种间均存在显著差异(P<0.05).早稻品种CH4、N2O季节平均排放通量极差分别为0.58 mg.(m2.h)-1、5.89μg.(m2.h)-1,晚稻为4.06 mg.(m2.h)-1、5.70μg.(m2.h)-1;早稻品种温室气体排放的增温潜势、单位产量增温潜势极差分别为2.92 kg.hm-2、0.097 kg.kg-1,晚稻分别为2 256 kg.hm-2、0.28 kg.kg-1.增温潜势、单位产量增温潜势比较,常规稻>超级杂交稻>杂交稻.早稻无水稻种植区CH4、N2O季节排放通量分别是水稻种植区的27.1%～31.8%、33.6%～88.3%;晚稻分别是23.8%～28.8%、38.6%～45.3%.早稻适宜种植品种为陆两优819、金优402、湘早籼24号,晚稻品种为岳优9113、湘晚籼12号.     

污水生物处理实际工艺中氧化亚氮的释放：现状与挑战

介绍了污水生物处理过程中N2O的产生途径,重点分析了污水厂典型脱氮工艺的N2O释放差异及其原因,提出了城市污水脱氮处理过程N2O减排的具体措施,并估算出全国城镇污水处理厂2011年N2O释放总量约为1.26×109g(以N计),对今后关于城市污水脱氮处理过程N2O产生及减排的研究趋势进行了评估.     

两种新型涂铁改性砂的过滤性能及反冲洗条件研究

以两种新型涂铁改性石英砂(纳米氧化铁改性砂,Nano-OCS;氧化铁改性砂,IOCS)及普通石英砂(RQS)为研究对象,考察了两种新型改性砂对沉后水腐殖酸及浊度的直接过滤效果,对其反冲洗条件进行优化研究,并对3种滤料的过滤效果进行了比较.结果表明,1滤层厚度为45 cm时,最佳滤速为6 m·h-1;3种滤料对腐殖酸和浊度的直接过滤效果依次为:Nano-OCSIOCSRQS,其中两种涂铁砂对腐殖酸的去除率分别为71.70%和61.61%;2Nano-OCS和IOCS滤柱的反冲洗流程分4步,对应的流程及最佳操作条件为:首先,用0.5 mol·L-1NaOH的溶液浸泡,气冲强度13 L·s-1·m-2,气冲时间6 min;然后,用0.075 mol·L-1的NaOH溶液与空气同时反冲洗,NaOH溶液冲洗强度为8 L·s-1·m-2,气冲强度13 L·s-1·m-2,冲洗时间3 min;接着用0.015 mol·L-1的FeCl3溶液与空气同时反冲洗,FeCl3溶液冲洗强度为8 L·s-1·m-2,气冲强度13L·s-1·m-2,冲洗时间2 min;最后,用清水冲洗,冲洗强度8 L·s-1·m-2,冲洗时间4 min.两种涂铁砂反冲洗前后表面形态结构更加复杂、粗糙度增加,对腐殖酸去除率进一步提高.3当滤层厚度由45 cm增加到80 cm时,Nano-OCS对腐殖酸直接过滤的最高去除率由74.6%提高至80.3%,平均去除率由57.9%提高至68.5%.     

需求视角的中国能源消费氮氧化物排放研究

基于经济投入产出生命周期评价(EIO-LCA)模型构建了中国1990—2010年能源消费氮氧化物完全排放矩阵,从需求的角度分析了氮氧化物排放在部门和不同需求间的分布结构,并通过情景模拟深入探讨了最终需求结构变化对氮氧化物排放的综合影响和拉动效应,以期探索中国氮氧化物减排的多元化途径.研究结果显示,1990—2010年中国氮氧化物排放总量从878万t上升到2398万t,历年来由工业部门拉动产生的氮氧化物占总量的比重高达70%左右;由最终消费拉动的氮氧化物排放比重逐年下降,资本形成和出口拉动的氮氧化物排放比重逐年上升.氮氧化物排放强度则从47.0 kg·万元-1降至6.0 kg·万元-1,其中,能源和交通部门的排放强度最高.通过情景模拟可以看出,提高最终消费比重,扩大内需有利于氮氧化物总量减排,尤其是对工业部门的减排效果显著.实现氮氧化物总量减排目标,要求在技术进步之外,积极寻求多元减排措施,以强化减排效果,突出能源和交通等重点部门的氮氧化物防治体系建设,并通过扩大内需优化最终需求结构以促进工业部门氮氧化物减排.     

Mo-modified Pd/Al2O3 catalysts for benzene catalytic combustion

Mo-modified Pd/Al2O3catalysts were prepared by an impregnation method and tested for the catalytic combustion of benzene. The catalysts were characterized by N2 isothermal adsorption, X-ray diffraction（XRD）, X-ray photoelectron spectroscopy（XPS）, temperatureprogrammed desorption of NH3（NH3-TPD）, H2temperature-programmed reduction（H2-TPR）, and high-angle annular dark-field scanning transmission electron microscopy（HAADF-STEM）. The results showed that the addition of Mo effectively improved the activity and stability of the Pd/Al2O3catalyst by increasing the dispersion of Pd active components, changing the partial oxidation state of palladium and increasing the oxygen species concentration on the surface of catalyst. In the case of the Pd-Mo/Al2O3catalyst,benzene conversion of 90% was obtained at temperatures as low as 190°C, which was 45°C lower than that for similar performance with the Pd/Al2O3catalyst. Moreover, the 1.0% Pd-5% Mo/Al2O3catalyst was more active than the 2.0% Pd/Al2O3catalyst. It was concluded that Pd and Mo have a synergistic effect in benzene catalytic combustion.